CC Cream

Skin Care

CC Cream

By: TOM BRANNA

Editor

Ingredients

%

Phase A

Deionized water
56.55

0

Dissolvine GL-47-S (Tetrasodium glutamate diacetate) (Coast Southwest, Akzo Nobel Func. Chem.)
.50

PEG 400 (PEG 400) (Coast Southwest)
1.00

DL-Panthenol, 75% (Coast Southwest) (Panthenol)
2.00

Glycerin (Coast Southwest) (Glycerin)
4.00

Synthalen CH (Coast Southwest, 3V, Inc.) (Carbomer)
.20

Endimate 33V (Coast Southwest) (Caprylic/capric triglycerides)
3.00

Cocoa butter (Theobroma cacao (cocoa) seed butter)
1.00

Kemester GTB (Coast Southwest, PMC Biogenix) (Glyceryl tribehenate)
2.00

Cetyl alcohol (Coast Southwest) (Cetyl alcohol)
1.00

Cetyl Stearyl Alcohol (Coast Southwest) (Cetearyl alcohol)
1.00

Endimulse 165V Flake (Coast Southwest) (Glyceryl stearate (and) PEG-100 stearate)
3.00

Uvasorb MET (Coast Southwest, 3V, Inc.) (Benzophenone-3)
3.00

Unasorb OTX (Coast Southwest, 3V Inc.) (Octocrylene)
2.00

Coloursphere WL 10 HL Red (Coast Southwest) (Styrene/acrylates copolymer (and) PEG 26 PPG 30 phosphate (and) CI 77491 (Red iron oxide))
.22

Coloursphere WL 10 HL Yellow (Coast Southwest) (Styrene/acrylates Copolymer (and) PEG 26 PPG 30 phosphate (and) CI 77492 (yellow iron oxide))
.76

Coloursphere WL 10 HL Black (Coast Southwest) (Styrene/acrylates copolymer (and) PEG 26 PPG 30 phosphate (and) CI 77499 (black iron oxide))
.10

Farmal GS 3737 (Coast Southwest, Farmal) (Zea mays corn starch)
1.00

Abiol (Coast Southwest, 3V Inc.) (Imidazolidinyl Urea)
.10

Phase B

Propylene Glycol (Coast Southwest) (Propylene glycol)
3.00

Phase C

Endisil F-50 (Coast Southwest) (Dimethicone)
3.50

Phase D

Endisil FC 677 (Coast Southwest) (Phenyl Trimethicone)
2.00

Phase E

TEA 99% (Coast Southwest) (Triethanolamine)
.30

Phase F

Coloursphere WL 10 HL Tio2 (Coast Southwest) (Styrene/acrylates copolymer (and) PEG 26 PPG 30 phosphate (and) titanium dioxide (CI 77891))
6.62

Phase G

Alguard PF (Coast Southwest, Frutarom) (Porphyridium polysaccharide)
.10

Phase H

Sharomix MT (Coast Southwest, Sharon Laboratories)(Methylisothiazalone)
.05

Phase I

Ultrapolymer 2041-R (Coast Southwest, Ultra Chemical) (Water and polyvinylacetate)
2.00

Procedure

Fill main vessel with phase A. Begin heating. In side vessel, add phase B, slurry, and add to phase A at 45C. In a separate vessel, add phase C in order and heat. As phase C is heating, at 45-50°C add phase D to the batch. Mix until uniform and continue heating to 75-80°C. When both oil and water phases reach 75-80°C, slowly add oil phase to main vessel with moderate mixing. When added, allow to mix for 3-5 minutes, then homogenize for 1-2 minutes. Begin cooling batch. At 60°C, add phase E. At 40-45°C add phase F to batch. (Note: Premix phase F in a separate vessel, then add to batch.) Continue mixing and cooling. Add phases G and H. At 30-35°C, add phase I and then homogenize for 1-2 minutes.